Our Webstore will remain open, so order away!
The Features and Benefits of this product are as follows:
PROGRIP STONE & GLASS MOSAIC ADHESIVE® is a specifically designed high strength cement based polymer modified adhesive recommended for fixing and grouting of stone, glass and reconstituted stone mosaics onto all types of cement based substrates and pre-primed surfaces.
It is suitable for both wall and floor applications, for installing tiles in intermittently wet areas as well as in underwater conditions i.e. swimming pools and showers.
This product includes “MILDEW BLOCK” which actively protects against the growth of mildew and algae.
Due to the fine nature of this adhesive, it is also suitable for use as a grouting compound whenever its antimicrobial properties are required e.g. showers, bathrooms etc. This product is available in three colours:- white, light grey and dove grey.
- Add 1.75 lt of water to a suitable container.
- Slowly add 5 kg of the product.
- Mix to a creamy consistency. The use of an electric drill and paddle is recommended to ensure thorough mixing.
- Use within 2 hours. If the product thicken DO NOT ADD MORE WATER – rather stir thoroughly to extend pot life.
Ensure that surfaces to be tiled are sound (no cracks or crumbling), clean, free of dust, release agent, fungi, or any surface dampness. Fungi must be removed and the spores killed with the use of an effective fungicide. (a dilution of household bleach is sufficient) *This guideline only serves as a basic manual for the surface preparation, product selection and installation procedure for this type of application. Each installation needs to be assessed on merits and the products used and the procedures followed should be in accordance with the SABS code for the design and installation of ceramic tiles (SABS 10107:2011).